Swarovski Optik EL Range 10x42 User Manual Download Page 2

21

DE

20

DE

pos. a:

 Initial position without specta-

cles: twist out the eyecups anticlock-
wise to the full extent.

pos. B:

 Initial position with spectacles: 

twist in the eyecups clockwise until 
they stop.

pos. c and D:

 Alternative positions or 

interim adjustment stages for spectac-
le wearers and non-spectacle wearers.

3.2. adjusting the interpupillary distance

to see a single round image, adjust the separation between 
the two halves of the binoculars until the irritating shadows 
disappear.

3.3. Use with equal acuity of both eyes

a.

 Pull out the left and right dioptric adjustment ring and turn 

it until the long bar on the dioptric scale is in line with the 
small triangle underneath the ring.

Never look directly at the sun with 
the binoculars! this will damage your 
eyes!

Never look through the binoculars 
when walking, you could encounter 
obstacles!

Please protect your binoculars from 
jolts and jars.

Repairs should be carried out by 
authorized service facilities only.

 3. Getting started

the battery is already inserted into the battery compartment. 
the binoculars are ready for immediate use. Before switching 
on the instrument, please make the following settings:

3.1. adjusting the twist-in eyecups 

In principle, you can choose between four different setting 
positions that provide varying distances between your eye 
and the lens. You can set the optimal distance according to 
your personal preference. 

EN

EN

Summary of Contents for EL Range 10x42









Reviews: