Swann Wireless OutdoorCam SW231-WCX Operating Instructions Manual Download Page 11

26

26

26

26

Cumplimiento con normas de la FCC:
NOTA: 

Este equipo ha sido probado y cumple con las disposiciones impuestas 

para los equipos digitales de clase B, de acuerdo con el aparte 15 de las normas 
de la FCC.  Estas disposiciones se dan con la intención de proporcionar una pro-
tección razonable, contra las interferencias perjudiciales en instalaciones residen-
ciales.  Este equipo genera, utiliza y puede irradiar energía en forma de frecuen-
cias de radio, y si no se instala de acuerdo con las indicaciones, puede causar 
interferencias perjudiciales en la recepción de señales de radio o televisión, las 
cuales pueden ser detectadas encendiendo y apagando sucesivamente el equipo.  
Se invita al usuario a tratar de corregir dichas interferencias siguiendo una o más 
de las siguientes medidas:
• Volver a orientar o cambiar de sitio la antena receptora;
• Incrementar la distancia existente entre el equipo y el receptor;
• Conectar el equipo en un tomacorriente diferente al que se encuentra conecta 
  do el receptor;
• Para obtener ayuda, consulte al distribuidor o a un técnico especializado en  
  radio y TV.

IMPORTANTE:

 

Prohibición contra la interceptación de llamadas.

Con excepción de las operaciones llevadas a cabo por las fuerzas de la ley bajo 
autorización judicial, ninguna persona podrá utilizar directa o indirectamente, un 
dispositivo que sea operado de acuerdo con las disposiciones de este aparte, con 
el propósito de escuchar o grabar conversaciones privadas de terceras personas, 
a menos que tal uso sea aprobado por todas las partes que estén involucradas en 
la conversación.

ADVERTENCIA:  

Cualquier modifi cación no aprobada por la parte responsable 

del funcionamiento del equipo, puede invalidar la autorización de operación del 
equipo por parte del usuario.

IMPORTANTES INSTRUCCIONES DE SEGURIDAD

· Asegúrese que el equipo esté instalado y asegurado correctamente, cuando esté 
  colocado en su lugar defi nitivo;
· No manipule el equipo si encuentra los cables y terminales pelados.

Antes que usted empiece

11

Technical Specifications

11

Video 

Image 

Sensor 

  1/3” 

CMOS

Video Quality 

 

 

380 TV Lines

Number of Effective Pixels 

NTSC: 510 x 492 / PAL: 628 x 582

Electronic Shutter 

 

1/60 - 1/15,000 NTSC / 1/50 - 1/15,000 PAL

Signal / Noise Ratio 

 

> 48dB

White 

Balance 

  Automatic

Gain 

Control 

  Automatic

Backlight Compensation   

Yes

Day/Night Mode  

 

Color during the day / Switches to B&W at night

Minimum Illumination 

 

0 Lux (IR On)

Lens 

   6mm

Viewing 

Angle 

  53 

degrees

Night Vision

Night Vision Distance 

 

Up to 26ft / 8m

Number of infrared LEDs  

11

Wireless

Digital or Analog 

 

Analog

Max Transmission Range   

165ft / 50m

Typical Range 

 

 

65ft / 20m

Frequency 

  2.4GHz

Transmission Channels   

4

General

Indoor/Outdoor 

  Indoor 

or 

Outdoor

Operating Power 

 

DC 12V

Operating Temperature   

-10°C ~ 50°C / -14°F ~ 122°F

Body Construction 

 

Aluminum

Dimensions Camera & Stand 

5.1” x 2.0” x 2.0” / 130mm x 50mm x 50mm

Weight – Camera & Stand 

8.6oz / 245g

Dimensions Receiver 

 

1.0” x 3.1” x 4.3” / 25mm x 80mm x 110mm

Weight – Receiver 

 

6.5oz / 185g

Summary of Contents for Wireless OutdoorCam SW231-WCX













Reviews: