Swann WARMNITE WN43008N, Manual

Page: 8 / 12

8 CUSTOMER SUPPORT TEAM:
+44 (0) 333 220 6056
FITTING THE BLANKET
Note:
This product can be used with any
type of bedding including waterproof bed
protectors. Use only as an under blanket and
do not use above the occupant of the bed.
Secure the blanket to the mattress in the
following manner:
• Place the blanket directly on the mattress.
Pull each strap over the edge of its
respective corner.
• Make sure the control switch end is at the
head of the bed, with the connector facing
downwards.
WARNING: Ensure the blanket is not folded
or creased.
When heating, do not cover the blanket with
pillows as this may cause overheating.
WARNING! When you position the cable,
make sure it DOES NOT become trapped
or kinked by any other objects or furniture
during use and storage. Poor positioning of
the power cable may result in injury and/or
damage to the user and their property.
FITTING INSTRUCTIONS
Please use the diagram as a guide.
Each blanket comes with a tie cord.
Position the blanket on the bed ensuring the
pillow area is clear.
Do NOT stretch the cord too tightly. Allow
some ‘give’ to avoid edge distortion.
Ensure knots are NOT tied too tightly so that
they can be undone easily.
1. Start at loop 1, thread the cord under the
mattress horizontally to loop 2.
2. Return from loop 2 back under the
mattress diagonally to loop 3.
3. Return from loop 3 back under the
mattress and horizontally to loop 4.
4. Return from loop 4 back under the
mattress and diagonally to loop 1.
NOTE: This image is for illustrative purposes
only. The actual product may differ from the
illustration.
start finish
10-15cm/4-6”
start finish
start finish