background image

12

THE HANDSET MENU

Volume

Allows you to adjust the following volume settings:
•  Talking Volume - The listening volume during a call.
•  Ringing Volume - The volume of the ringtone.
•  Ringing Time - The amount of time the handset rings when there is an incoming call.

Brightness

Allows you to adjust the brightness of the display.

Key Tone

Allows you to turn on or off the audible beep when a handset button is pressed.

Ring Tone

Allows you to change the ringtone that is played for an incoming call.

Snap Set

Allows you to turn on or off automatic snapshot of the live image shown on the display when there is an incoming call. 

It's recommended to turn this feature on so you know who rang the doorbell when you were not home or when you 

missed a call. 

Note:

 The handset can store up to a maximum of 100 photos at a time. When its internal storage becomes full, the 

handset will delete the oldest snapshots to make space. 

Snap Show

Allows you to view and manage snapshots taken by the handset. Press    or   to browse through the photos. The time 

and date are imprinted on the photos so you can quickly tell when they were captured. To delete a photo, browse to 
the photo, then press  and press 

to confirm.

Date & Time

Allows you to adjust the date and time on the handset. See 

"Setting the date and time" on page 11

.

Summary of Contents for SWWHD-DP890C

















Reviews: