1.
Take into consideration what you want to monitor
and where you’ll get the best view of it.
2.
How you’re going to connect the camera to your
monitoring system; remember that cables and con-
nections should be kept out of the weather.
3.
How to keep the camera out of harm’s way. It’s
recommended to mount your camera at an elevated
position.
4.
Place your camera as close to the area of inter-
est as practicable. The best position is from about
13ft/4m above looking slightly down, keeping in mind
the details you are looking for.
5.
Although the sky looks nice when you look at the
live view from your camera, it is an unlikely direction
for an offender to approach. Make sure your camera
has minimal sky in it as the light in daylight can make
the foreground of the image darker.
6.
Think about the most likely way a potential offend-
er may approach your home, use your camera to give
you the best coverage of these areas.
7.
The camera’s casing is resistant to different weath-
er conditions and tampering. It would take an over-
whelming event to damage the housing.
8.
Even though the camera is weather and water-
resistant, prolonged exposure to adverse weather
conditions such as sunlight or excessive moisture,
may eventually damage the internal components of
the camera and adversely affect its performance.
9.
Run cables inside a wall cavity or other protected
enclosure, and ensure that all wiring and connectors
are insulated and protected from moisture.
10.
Don’t put your cable near live electrical wiring. AC
electricity generates radio “noise” which can inter-
fere with the signal from your camera.
Camera Location Tips
5
