13
SwannView Link: Device Settings
Display: Channel Settings
Channel Name (Check Box):
Whether the channel’s name will be displayed on screen or not.
Channel Name:
The title you’d like to give that camera.
Record Data:
Whether the overlays (Channel Name, Date and so on) will be recorded onto the video with
your images.
Position Settings:
Select the position of the channel name and record date labels that are overlaid on the
screen.
Mask (Check Box):
Turns the masking function on or off.
Mask (Setup):
Creates a black privacy overlay which masks part of your images. Will affect recordings.
Display: Output
Resolution:
Set the screen resolution to output to your monitor.
Transparency:
How transparent you want the menus to be.
Mouse Sensitivity:
Adjust the sensitivity of mouse movements.
Dwell Time:
Select how long channels will be displayed when using auto-sequence mode.
Audio:
Enable or disable the audio.
Recording: General
Encoding Parameter:
Choose from the main-stream or sub-stream to configure.
Main Stream:
The way the device will internally process and record video.
Sub Stream:
The way the device will encode and send video to a remote device.
Record Audio (Check Box):
This function is not supported by the camera(s) supplied with the NVR.
Resolution:
How many pixels (little dots) make up your image.
Frame Rate:
How many images per second the device will capture.
Max. Bitrate:
The maximum size that your video files will be. The higher this is set, the better recordings
will look - however, they’ll also fill the memory card faster.
