Safety Guidelines
Read and Understand the Manual
It is the responsibility of any individual who installs or
maintains this product to fully understand and follow
proper installation and maintenance procedures. Be aware
of the inherent dangers
in
t
he use of power tools when
installing this product. Read and understand all Warnings,
Cautions, and Important Notices in this manual
.
Inspect Before Cutting
Make sure no electrical wiring or plumbing is present
before cutting into any surface.
Personal Protection
Be sure to use all personal protective
equipment, such as sturdy work boots,
preferably with steel toes, gloves, and hard hat, if necessary,
to ensure your own safety. To prevent possible damage to
your hearing, always wear ear protection, such as earmuffs or
earplugs, when working around power tools.
Room Temperature
Allow the Comfort Designs’ sink and silicone
sealants to adjust to room temperature for at
least six hours before installation. The product should not be
installed at temperatures below 65°F.
Solvents Hazard
Follow all manufacturer’s safety instructions for silicone
sealants and denatured alcohol. Alcohol vapors are
both flammable and hazardous to breathe. Silicone vapors
may irritate eyes and nose. Personal injury can result from
improperly handling or use of products, such as denatured
alcohol. Always follow the manufacturer’s recommendations
for the safe use of these products. Ventilate any work area
before beginning to apply silicone sealants, cleaning agents, or
solvents.
The Swan Assurance — if our product is
properly installed and maintained, as stated in
these instructions, it will not leak.
Remember –
Safety First
Comfort Designs, the makers of the
Swan Solid Surface products, cannot
anticipate every possible circumstance
that might involve a potential hazard
during the installation of our product(s).
The warnings and instructions in this
installation guide are, therefore, not all-
inclusive. If a tool, installation procedure,
or work method that is not specifically
recommended you must satisfy yourself
that it is safe. You should also make sure
that the product(s) will not be damaged
by the methods you choose. Comfort
Designs will not be held responsible for
water damage of any kind in connection
with the installation of this product.
To avoid product damage, personal injury,
or even possible death, carefully read,
understand, and follow all the instructions
in this installation guide before installing
this product(s). Do not use cleaning
fluids or operate power tools unless you
read and understand the instructions
and warnings in this and all other
applicable labels or manuals. Proper use
of tools and the products described in
this guide is your responsibility.
WARRANTY
This product is covered by a
Commercial Limited 30 Year Warranty.
Refer to the Warranty section in
this manual for complete details.
Save this manual for future
reference.
Important information on cleaning,
maintenance, and repair is contained
within.
WARNING
IMPORTANT NOTICE