5
HOW TO USE
READING LIGHT
To use the reading light simply press the reading light button
READING LIGHT BUTTON
CLEANING & MAINTENANCE
Ensure the product is unplugged from the mains and completely cooled before
cleaning. The pot should be cleaned daily with warm soapy water, then rinsed with
clean water. Do not leave water in the tank for long periods. Wait until the product
has cooled before emptying the tank. The outside of the unit can be cleaned with
a soft cloth moistened with a mild detergent solution. DO NOT USE CHEMICAL OR
ABRASIVE CLEANERS. DO NOT IMMERSE THE UNIT IN WATER.
DESCALING INSTRUCTIONS.
Refer to the limescale guide on the inner lid of the retail box.
Excessive lime scale build-up will hurt your precious TEASMADE! It is important to
de-scale the product regularly in order to maintain best performance. Use a good
de-scaling agent available from most supermarkets. Fill the tank using the pot and
include the de-scaling agent. LEAVE THE FILLER CAP OFF on this occasion. Place the
empty pot on it’s stand, ensuring it is in contact with the safety switch. Press the TEA
NOW button. The water in the tank will boil. Note:
With the filler cap off there will be
an increased amount of steam so be careful.
Once the water in the tank is boiling,
press the TEA NOW button to switch it off.
Carefully replace the filler cap and press the TEA NOW button once again. The
water will be ejected into the pot. This will de-scale all the pipes and tubes inside the
TEASMADE. Once de-scaling is complete, allow the unit to cool and rinse the tank and
pot in clean water.
PARTS REFS
If you need to order parts, call the number on the cover of this instruction manual or
go to our website at: www.swan-brand.co.uk
STM200-01: Jug
STM200-02: Reading light bulb
STM200N_IM.indd 5
15/06/2015 11:52
