9
Cleaning & Maintenance
DAILY CLEANING
The outside of your cooler can be cleaned using a soft cloth moistened with a mild detergent solution. Wipe
dry with kitchen towel.
Do not use chemical or abrasive cleaners on any part of your cooler as these could permanently damage
or discolour the surfaces.
DOOR SEALS
Ensure that the door seals are kept free from debris at all times. If they don’t seal properly this can waste
energy.
CLEANING INSIDE
From time to time it may be necessary to clean the inside of the cooler (eg after a spill)
1.
Switch off the cooler and remove plug from wall socket
2.
Remove drinks and shelves
3.
Clean the inside with a soft cloth moistened with a mild detergent soloution. Dry thoroughly with
kitchen towel before replacing the shelves, drinks and switching the unit back on.
4.
Do not use abrasive or chemical cleaners on any part of the the cooler at any time.
CONDENSATION
Depending on the environment, you may notice a little condensation on the outside of the glass door. This
is normal and can be wiped away with a dry cloth or piece of kitchen towel.
BS Plug Wiring
The wires in the mains lead are coloured in accordance with the following code:
BLUE
NEUTRAL
BROWN
LIVE
GREEN/YELLOW
EARTH
As the colours of the wire in the mains lead of this appliance may not correspond with the colour markings
identifying the terminals on your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or
coloured black. The wire which is coloured BROWN must be connected to the terminal which is marked
with the letter L or coloured red. The wire which is coloured GREEN/YELLOW must be connected to the
terminal which is marked with the letter E or (earth symbol) and is coloured GREEN or GREEN/YELLOW.
WARNING: THIS APPLIANCE MUST BE EARTHED
SR12030_IM.indd 9
01/12/2017 12:53
