8
Cleaning & Maintenance
DAILY CLEANING
The outside of your cooler can be cleaned using a soft cloth moistened with a mild detergent solution. Wipe
dry with kitchen towel.
Do not use chemical or abrasive cleaners on any part of your cooler as these could permanently damage
or discolour the surfaces.
DOOR SEALS
Ensure that the door seals are kept free from debris at all times. If they don’t seal properly this can waste
energy.
CLEANING INSIDE
From time to time it may be necessary to clean the inside of the cooler (eg after a spill)
1.
Switch off the cooler and remove plug from wall socket
2.
Remove drinks and shelves
3.
Clean the inside with a soft cloth moistened with a mild detergent soloution. Dry thoroughly with
kitchen towel before replacing the shelves, drinks and switching the unit back on.
4.
Do not use abrasive or chemical cleaners on any part of the the cooler at any time.
CONDENSATION
Depending on the environment, you may notice a little condensation on the outside of the glass door. This
is normal and can be wiped away with a dry cloth or piece of kitchen towel.
CHANGING THE BULB
1
2
3
1
2
3
Bulb
Bulb Holder
Bulb Holder Case
4
Bulb Cover
4
5
Switch
5
All parts removed must be saved during replacement of the light bulb.
Before removing the light bulb, unplug the cooler from the mains power supply. Failure to do so could
result in electrical shock or personal injury.
1.
Remove the light bulb cover 4 by pulling the bottom end of the light bulb cover gently.
2.
Unscrew the bulb 1 .
3.
Replace with a 10 watt-refrigerator bulb that is the same shape and size.
4.
Replace the light bulb cover 4
SR12020_IM.indd 8
17/02/2014 08:59
