Swann SR11010 Installation And User Manual Download Page 2

2

Important Safeguards

•  Do not connect your 

appliance to the electricity 
supply until all packing and 
transit protectors have been 
removed.

•  Leave to stand upright for at 

least 4 hours before switching 
on to allow compressor oil to 
settle

•  This fridge/freezer must 

only be used for its intended 
purpose i.e the storing and 
freezing of edible foodstuff.

•  Do not dispose of the 

appliance on a fire. Your 
appliance contains non-CFC/
HFC natural substances in 
the cooling system and in 
the insulation, which are 
potentially flammable if 
exposed to fire. Therefore, 
take care not to damage, the 
cooling circuit or pipes of the 
appliance in transportation 
and in use. In case of damage 
do not expose the appliance 
to fire or potential ignition 
source and immediately 
ventilate the room where the 
appliance is situated.

•  We suggest you contact your 

local authority for disposal 

information and facilities 
available.

•  See installation section 

for information on suitable 
location.

•  On delivery, check to make 

sure that the product is not 
damaged and that all the 
parts and accessories are in 
perfect condition.

•  Ensure that the plug remains 

readily accessible. Do not use 
multiple adaptor or extension 
cables.

•  Failure to observe these 

instructions may invalidate 
your right to free service 
during the guarantee period.

•  Keep ventilation openings, in 

the appliance enclosure or in 
the built-in structure, clear of 
obstruction.

•  WARNING

: Keep ventilation 

openings, in the appliance 
enclosure or in the built-
in structure, clear of 
obstruction.

•  WARNING

: Do not use 

mechanical devices or other 
means to accelerate the 
defrosting process, other 

SR11010.indd   2

13/07/2020   08:51

Summary of Contents for SR11010

















Reviews: