4
HOW TO USE
BEFORE USE
Remove all packaging. Wash the blender
shaft in warm, soapy water (do not
submerge). Rinse and dry thoroughly.
GETTING TO KNOW YOUR HAND BLENDER
• Before assembling the blender,
be sure that the power cord is
unplugged and switch is in the OFF
position
• Turn the blender shaft clockwise to
remove and anti-clockwise to refit -
not the position guides on the body of
the produt
• Lower the hand-held blender into
food. Then press and hold the low
speed button to start operating. At
the same time you can select desired
speed setting by dialing the speed
control dial, the speed will get higher
gradually when you dial the speed
control dial from right to left
• MAX operation time is 1 minute.
Speed selector
Switch button
Turbo button
Blender shaft
Power cord
This should be more than enough for most operations. After 1 minute
running, the unit should be rested for 3 minutes to cool.
• You also can start operating by pressing and holding the high speed
button (turbo button), the appliance will operate at the highest speed
all the time. The speed will not change even if you dial the speed control
dial.
• To stop the hand-held blender release the low speed button or high
speed button
• Warning
: Do not put fingers or any utensil near the blades during
operation
SP20160_IM.indd 4
26/07/2016 11:38