14 | SmithsEP.co.uk | Issue 001 - September 2022
Issue 001 - September 2022 | SmithsEP.co.uk | 15
Changing from offline
mode to online mode
If you want to use the internet App and the
Universal Gateway Hub UG600 (available as an
accessory product code: HACA33130), you need
to change your thermostat settings from offline
mode to online mode. For that please follow the
steps below:
M
2
2 Sec
2 Sec
2 Sec
M
1
M
6
M
5
4
M
M
3
M
M
Press from the App and
follow the on screen instructions.
You’re now in
Standby Mode.
Set up your device
on the App.
7
8
Note: To view detail of set up, operation and
parameters, please consult the full manual at:
https://salus-controls.com/uk/product/fc600/#downloads
Temporary override
M
2
Note: The temporary
override will be
active until the next
program starts.
You can cancel the
temporary Override
by pressing
M
M
1
3
M
5
M
4
Factory reset
M
M
M
M
If you have made an error or need to change
your system parameters, or want to return to
the factory settings, please follow steps below.
By performing this action you will lose all your
settings. Factory reset will only take effect on the
thermostat you are working on.
2
4
6
8
M
M
M
M
1
2 Sec
2 Sec
2 Sec
5
7
3
M
Press OK once then press and hold 3 buttons
for 2 seconds.
The digits on the screen will flash. Using the up/
down keys enter pass 55 then click OK.
Press Ok and then short press button to
confirm pairing.
Scan for equipment
To temporarily override and cause the heater to
function follow steps 1-5. This should be used
during the commissioning process.
User Guide
For further information and to view detail of set
up, operation and parameters, please consult the
full manual at:
https://salus-controls.com/uk/product/fc600/#downloads
SALUS Smart Home App
You can also access the web version at:
http://eu.salusconnect.io/
Youtube
https://www.youtube.com/user/SalusControls
