8
5. Before each new ironing session we recommend cleaning iron unit as following
methods: Take the iron up from the base unit, press steam release button
underneath the handle to allow steam ON for 30 seconds, and then OFF for 30
seconds, this cycle should be repeated for 2 times. When heat indicator light
turns off, it is ready for use.
6. After use, put iron unit back on the base unit again, turn temperature control
knob to“MIN”, and then unplug the appliance from mains socket.
HOW TO USE
VERTICAL STEAM IRONING
•
Follow the steam ironing process, and then hold
the iron in vertical position about 5cm to 15cm
away from the hanging fabrics. Press the steam
release button, which will create vertical steam.
•
This feature is especially used for removing
creases from hanging clothes and curtains.
Never directsteam toward people or animals
(Fig.8)
•
The room should be ventilated.
•
Note: Never block the steam hose.
Fig.8
AUTO LOCK STEAM BUTTON
•
If you feel your fingers need a rest from all that button pressing you can press
down steam button lock and then push it backwards. The steam button will
automatically lock. Steam will be produced continuously. If you want to stop
steam, please push steam button lock forward.
•
Note: Once steam button auto-locking function is activated, do not leave the iron
unattended.
SAFETY PROTECTION DEVICE
There is a safety valve in the base unit which is an additional safety protective device
used to limit the steam pressure of the boiler within the safety range. Don’t unscrew
the safety valve during use, since the steam from the boiler can cause scalding!
SI9060N_IM.indd 8
22/04/2014 09:12
