7
HOW TO USE
5. Leave the heater to cool and unplug it before moving it, and use the handle to
move it.
USING THE HEATER
1. The switches of thermostat control and selection of the power must be on the
MIN and “0” position before plugging in the heater.
2. Switch on the heater to one of the following positions three positions:
1: 800W,
2: 1200W. 3: 2000W
3. Turn the thermostat switch to MAX.
4. The operation indicator light illuminates when the heater is operating.
5. The ambient temperature can be controlled by the thermostat. Turn the ther-
mostat knob clockwise to increase the temperature, or counterclockwise to
decrease, until the desired temperature is achieved.
6. After reaching the desired temperature, to maintain the temperature: turn the
thermostat knob counterclockwise until the indicator light turns off. The desired
temperature will be kept constant by the thermostat function.
7. When not using this heater, switch the 2 buttons to their original position . “0 “
and “ MIN . “And then unplug it.
8. The radiator has a protection system against overheating.
9. Never cover or place any object on the radiator during operation.
FROST PROTECTION FEATURE
With the thermostat switch set to this position and one of the power levels select-
ed, the appliance maintains room temperature at about 5°C preventing freezing.
SH60010_IM.indd 7
20/04/2018 09:15
