Swann NHD-830 User Manual Download Page 3

3

Introduction

on your decision to purchase this 

varifocal*

 

Swann

 HD IP camera! 

Whether you’ve chosen the standard case or the dome form factor, this is an excellent 

addition to your 

Swann

 NVR monitoring solution.

IMPORTANT: This camera is intended for use with a  

Full HD-capable 

Swann

 NVR, such as the NVR-7200/7250 series.

This is camera can work as a stand-alone IP camera, but may not be  

compatible with any other NVR or network video device.

If you are looking for instructions on how to use these cameras as a stand-alone IP 

camera solution, you can find information on our website, 

.

This short manual will walk you through the 

connection

mounting

aiming

 and 

lens configuration

 of your camera, as well as suggest some tips and tricks for placing 

your cameras and designing your system. 
If you have any trouble, look towards the end of the booklet where you’ll find a short 

troubleshooting guide

, as well as 

technical support details

.

*What does “varifocal” mean?

 A variable focus lens allows you to zoom the camera’s view in and out. It’s 

like a zoom lens on a digital camera, but it’s pretty rare for CCTV systems to feature varifocal lenses. We’ve 

included them here on these cameras because we think it makes them suitable for a huge range of locations 

and applications.

Summary of Contents for NHD-830













Reviews: