Swann Mobile viwer Installation Manual Download Page 4

On/Off Switch

Power Socket

Volume Control

Video Out Socket

Channel Select Button

Channel Indicator LED

Speaker

LCD Screen

Li-Ion Battery

Battery Cover

Stand

Earphone Socket

!

Please test all devices before final installation because transmission quality can often be improved 

by moving the components slightly.

!

Turn off the transmitter and receiver if the system is not in use.

!

Do not touch the antennas when the system is switched on.

!

To avoid the risk of damage to Mobile Viewer, use only the supplied power adaptors.

!

Don’t place above or near a heat source which may cause the equipment to overheat.

!

Microwave ovens can cause interference and diminish the quality of the signal if the Mobile Viewer 

or camera are located close by.

!

Beware of humid locations. Water droplets or spray may damage the units. If condensation does 

occur, do not use until the equipment has dried out.

!

Never paint or attach metallic labels or stickers of any kind.

!

Do not use two Mobile Viewer systems operating on the same channel at the same time in the 

same area. This will result in picture interference. If you wish to use two receivers at the same 
time you will need cameras on two different frequencies.

!

Do not cut the DC power cable of the Mobile Viewer to fit with another power source. This may 

result in damage to the Mobile Viewer & any unauthorised modifications will void your warranty.

!

If you wish to view the output from your Mobile Viewer on your TV or VCR, you will need to select 

the appropriate AV input source or channel on the device to ensure you get a clear image. Check 
the manual of your TV or VCR for information on how to obtain an image from an AV device.

Best Results are achieved where there is a clear “line of sight” between the Mobile Viewer and the 
camera / transmitter.

!

Try to avoid obstacles such as trees, walls, cars, trucks and buildings when maximum range is 

required.

!

Interference from certain electronic equipment or the moving human body can also affect the 

range obtainable.

!

4

5

Receiver Features

Important Information about this product

Summary of Contents for Mobile viwer

Page 1: ...o any third party Unauthorised end user or third party modifications to any component or evidence of misuse or abuse of the device will render all warranties void Help Desk Support Details Warranty Information www swannsecurity com 8 Note Wireless Networks WiFi may interfere with and or experience interference caused by the transmitterin this unit Changing the receiver to another channel frequency...

Page 2: ...lt Operating Power 5V DC 2Amp Power Consumption 700mA Operating Temperature 32 F 113 F 0 C 45 C 85 RH 5 Size 5 x 3 x 1 130 x 80 x 38mm 32 Weight 8 oz 250g 2 7 Index Introduction Mobile Viewer comes with Technical Specifications FCC Notice We Swann Communications of 10612 Shoemaker Avenue Bldg A Santa Fe Springs CA 90670 USA declare under our sole responsibility that the product SW G MVIEW To which...

Page 3: ... shows this area The receiver was on a different channel but has now gone to channel 1 After the power to the receiver is interrupted the unit resets to channel 1 after power is restored The Mobile Viewer features an internal omni directional antenna and is most effective when used in the UPRIGHT position Use the illustrations on page 4 for information on the location of the various controls menti...

Page 4: ...kers of any kind Do not use two Mobile Viewer systems operating on the same channel at the same time in the same area This will result in picture interference If you wish to use two receivers at the same time you will need cameras on two different frequencies Do not cut the DC power cable of the Mobile Viewer to fit with another power source This may result in damage to the Mobile Viewer any unaut...

Reviews: