background image

7

Feet / Meters

5f

t/1.8m - 7f

t/2.4m

16ft/5m

16ft/5m

32ft/10m

32ft/10m

50ft/15m

50ft/15m

110°

70°

The PIR motion sensors have an effective range of between 16ft/5m and 50ft/15m 

depending on the specific conditions of the environment. Typically, the sensor 

will  have a longer range in colder conditions, or in evenly heated environments. 

The opposite is also true - environments with uneven temperatures (such as part of 

the area in sunlight and other areas in shade) or consistently high temperatures will 

lower the effective range of the sensor.
Under typical circumstances, the maximum effective range of the PIR motion sensor 

is approximately 50ft/15m. Multiple sensors can be used in conjunction with one 

another to cover larger spaces.

Important:

• 

Any obstructions in the environment will reduce the sensors effectiveness. It 

can’t see through walls! Even a thin sheet of glass will significantly impair the 

range of the sensor, as glass blocks more infrared radiation than visible light.

• 

Small animals (such as a cat or similar) can, under some circumstances, trigger 

the PIR motion sensors. Therefore, we suggest that the PIR motion sensors are 

not suited to areas where pets are routinely kept. 

Placing the PIR Motion Sensors

Summary of Contents for MALARM1301012E













Reviews: