8
1.
Slide battery onto hand vacuum until
firmly attached (Fig. 1).
2.
Slide wand onto hand vacuum until it
clicks (Fig. 2).
3.
Push wand into motorized floor nozzle
until it clicks (Fig. 3).
How to install wall mount
•
Choose location near power outlet.
Locate point high enough on wall to
allow wand and motorized floor nozzle
to hang freely.
•
Place mount against wall and use pen-
cil to mark drill holes.
•
Drill holes (with 6mm bit) and insert all
plugs. Insert screws through holes on
mount and tighten until firmly attached
(Fig. 4).
How to charge battery and store acces-
sories
•
Place assembled vacuum cleaner on
wall mount.
•
Plug charger into power outlet and
then into charger port on handle (Fig.
5).
•
Loop charger cord into clips on sides of
wall mount.
•
Snap tool(s) into tool storage areas
(Fig. 5).
Battery indicator lights show level of
charge (Fig. 5):
A. Fully charged
B. Half charged
C. Low power
•
Indicator lights stop blinking when fully
charged.
•
Charge battery fully before using for
the first time. This may take up to four
hours.
EASY ASSEMBLY
1
5
C
A
B
2
Click!
3
Click!
4
Cord
clip
Wall plugs
Tool storage
Cord
clip
Tool storage
SC15822N_24N_IM.indd 8
29/04/2019 16:24