Introduction
Your package comes with
Important Information about this product
Tips for using your Swann Security Camera
Connect the Dummy PIR Camera to your monitoring device
Connect the Dummy PIR Camera to your monitoring device (continued)
Tips for locating your camera
Technical Specifications
Help Desk / Support Details
Warranty Information
2
2
3
3
4
5
6
7
Back Cover
Back Cover
2
2
3
3
4
5
6
7
Back Cover
Back Cover
The Dummy PIR Camera is a versatile miniature CCD Security camera that produces a high quality
image without the need for a bulky easily seen camera. The Dummy PIR Camera is designed to blend in
with your security alarm detectors to make it difficult for criminals to detect and avoid. It can be used to
provide your home or office with a clear picture that can be easily displayed on a DVR, TV, VCR or
Security Monitor.
The Dummy PIR camera is designed for best performance when used with Swann DVRs and Security
Monitors, but will just as easily work with your existing CCTV Equipment, TV, VCR or a Computer with a
video capture card. The Dummy PIR camera is designed to be used indoors, but could be used outdoors
with a suitable protective housing or enclosure. The Dummy PIR camera can be used for a variety of
purposes including monitoring callers at the door or keeping your car, yard, shop or children’s play area
under observation.
INSTALLATION
• PIR Dummy PIR Camera with fixed 5 Feet (1.5Metre) Cable
• BNC male 33 Feet (10Metre) Video Cable
• BNC male to RCA male Gender Changer
• Power adapter
• Security Stickers
• Bag containing screws and wall plugs
• This Instruction Sheet
If any of these items are missing, please contact your retailer.
Image Sensor:
1/4”Color SuperHAD CCD
Picture Elements:
PAL - 500 (H) x 582 (V) / NTSC - 510 (H) x 492 (V)
Video System*:
NTSC - USA & Canada, PAL - AU, UK & EU
Horizontal Resolution:
420 TV Lines
S/N Ratio:
> 48db
Minimum Illumination:
0.8 Lux @ F1.2
Lens:
Triangle Pinhole 3.7mm / F2.0
Electronic Shutter:
Auto 1/50 ~ 1/100,000sec
Video Output:
1.0v (P-P) @ 75 ohm
Power Supply:
12volts DC
Operating Current:
120mA
Video Cable Connector:
BNC Female
Housing Material:
ABS Plastic
Dimensions (H x W x L):
4” (H) x 2¼” (W) x 1¼” (D) / (104mm x 60mm x 33mm)
Operating Environment:
32°F ~ 113°F (0°C ~ 45°C)
Weight:
3½ ounces (100g)
*Please note that this camera ships in the appropriate TV/Video system for the country of sale. In countries using the NTSC
TV standard the camera will be built to the NTSC standard, and in countries using the PAL TV standard, the camera will be
built to the PAL standard. The camera cannot be switched from one standard to the other.
FCC Notice
We, Swann Communications of 10612 Shoemaker Avenue, Bldg A, Santa Fe Springs, CA 90670 USA, declare under our sole
responsibility that the product:
SW-P-DPCC
This product meets the requirements specified in Part 15 of FCC Regulation. Operation rests with the following two
conditions:
(1) The equipment should not cause any harmful interference;
(2) The equipment must receive and process any interference, including any possible interference caused by operation
mistakes. After testing the product, we confirm that it complies with the provision for class C digital equipment in the 15th
part in FCC regulation; and the receiver complies with the limitations for class B digital equipment in Part 15 of FCC
regulation. The product generates, applies and emits radio waves. It might cause harmful interferences to wireless
communication if not be installed and used following the description of the manual. The product may cause interference in
residential area, and the customer should take remedies to eliminate the interference at their own costs. If the product
causes any harmful interference to wireless equipment or disturbs the receiving of TV signals (it can be identified by turning on
and off the product), you can solve the trouble by following methods:
(1) Re-adjust the product or put it in another place;
(2) Extend the distance between the equipment interfered and the product; and
(3) Refer to dealers or experienced radio electrician for help.
CE Notice
This product complies with standards including
L
ow
V
oltage
D
evice Directive 73/23/EEC;
EMC
Directive 89/336/EEC and
R&TTE
Directive 1999/5/EC. It passed the subject tests by the authority concerned and is authorized to bear
CE
mark.
2
7
Contents
Technical Specifications
Introduction
Your package comes with…
FCC NOTICE
This device complies with Part 15 of FCC Rules.
Operation is subject to the following conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation
