AMU Rescon
Program List and Explanations
A-96.250.351 / 230320
47
9.
Program List and Explanations
1 Messages
1.1 Pending Errors
1.1.5
Provides the list of active errors with their status (active, acknowl
-
edged). If an active error is acknowledged, the alarm relay is active
again. Cleared errors are moved to the Message list.
1.2 Message List
1.2.1
Shows the error history: Error code, date / time of issue and status
(active, acknowledged, cleared). 65 errors are memorized. Then
the oldest error is cleared to save the newest error (circular buffer).
2 Diagnostics
In diagnostics mode, the values can only be viewed, not modified.
2.1 Identification
Desig.
:
Designation of the instrument.
Version
: Firmware of the instrument (e.g. V6.20-11/16).
2.1.3
Factory Test
: Test date of the instrument and motherboard.
2.1.4
Operating Time:
Shows the operating time in years, days, hours,
minutes and seconds.
2.2 Sensors
2.2.1
Cond.Sensor:
2.2.1.5
Cal. History:
Only visible in resistivity mode. Shows the values of
the last fine adjust.
Number
: Calibration counter
Date, Time
: Date and time of calibration
RSlo
: Measured resistance
Max. 64 data records are memorized.
Current value
: Shows the actual measuring value in MΩ or
S.
Raw value
:
Shows the actual measuring value in MΩ or
S.
Cell Constant
: Shows the cell constant.
