68
A-96.250.321 / 191015
AMI Solicon4
Program List and Explanations
5.3.2.7
Output/Control
: Select operating mode of the controller output:
The relay contact can be activated daily, at any time of a day.
5.3.2.341
Start time
: to set the start time proceed as follows:
1
Press [Enter], to set the hours.
2
Set the hour with the [
] or [
] keys.
3
Press [Enter], to set the minutes.
4
Set the minutes with the [
] or [
] keys.
5
Press [Enter], to set the seconds.
6
Set the seconds with the [
] or [
] keys.
Range: 00:00:00–23:59:59
5.3.2.44
Run Time
: see Interval
5.3.2.54
Delay
: see Interval
5.3.2.6
Signal Outputs
: see Interval
5.3.2.7
Output/Control
: see Interval
The relay contact can be activated at one or several days, of a
week. The daily starting time is valid for all days.
5.3.2.342
Calendar
:
5.3.2.342.1
Start time
: The programmed start time is valid for each of the pro-
grammed days. To set the start time see
Range: 00:00:00–23:59:59
5.3.2.342.2
Monday
: Possible settings, on or off
to
5.3.2.342.8
Sunday
: Possible settings, on or off
5.3.2.44
Run Time
: see Interval
5.3.2.54
Delay
: see Interval
5.3.2.6
Signal Outputs
: see Interval
5.3.2.7
Output/Control
: see Interval
Cont.:
Controller continues normally.
Hold:
Controller continues based on the last valid value.
Off:
Controller is switched off.
5.3.2.24
daily
5.3.2.24
weekly
