50
A-96.250.871 / 120417
AMI CACE
Program List and Explanations
9.
Program List and Explanations
1 Messages
1.1 Pending Errors
1.1.5
Provides the list of active errors with their status (active, acknowl-
edged). If an active error is acknowledged, the alarm relay is active
again. Cleared errors are moved to the Message list.
1.2 Maintenance List
1.2.5
Provides the list of necessary maintenance. Cleared maintenance
messages are moved to the Message list.
1.3 Message List
1.3.1
Shows the error history: Error code, date / time of issue and status
(active, acknowledged, cleared). 65 errors are memorized. Then
the oldest error is cleared to save the newest error (circular buffer).
2 Diagnostics
In diagnostics mode, the values can only be viewed, not modified.
2.1 Identification
Desig.
:
Designation of the instrument.
Version
: Firmware of instrument (e.g. V6.20-10/16)
2.1.4
Factory Test
: Test date of the Instrument, Motherboard and
Frontend
2.1.5
Operating Time:
Years / Days / Hours / Minutes / Seconds
2.2 Sensors
2.2.1
Conductivity
:
2.2.1.1
Sensor 1
: Shows the
Current value
in µS
Raw value
in µS
Cell Constant
2.2.1.2
Sensor 2
: Shows the
Current value
in µS
Raw value
in µS
Cell Constant
Summary of Contents for AMI CACE
Page 1: ...AMI CACE Version 6 20 and higher A 96 250 871 120417 Operator s Manual...
Page 79: ...AMI CACE Index A 96 250 871 120417 77 Terminals 20 22 23 26 U USB Interface 27 W Wire 18...
Page 80: ...78 A 96 250 871 120417 AMI CACE Notes 12 Notes...
