4
Introduction
Congratulations
on your purchase of this
Digital Wireless Security System
from
Swann
.
Yes, the word “system” is there on purpose: by using the clarity and robust nature of digital
transmission technology paired with a built-in receiver, recorder and monitor, we think you’ve
just acquired one of the best stand-alone wireless CCTV solutions available.
You’ve picked a versatile and easy to use security solution which can be quickly and easily
configured to service your unique needs. Best of all, there’s no need to poke holes in walls to
run cables!
How to proceed from here:
•
Check out the
IMPORTANT INFORMATION
below. We don’t mean to be dramatic, this is
just stuff you should know about the ADW-340 so it doesn’t surprise you later.
•
Take a moment to appreciate that you’re not trying to install video cables into walls or
ceiling cavities. Perhaps make a cup of tea or coffee with your free time?
•
Read on through the layout section, and familiarise yourself with the various ports,
connections and buttons. Drink the tea or coffee you made a moment ago.
•
Then, look at
“Setup Guide”
on page 8.
IMPORTANT INFORMATION
: Read this before proceeding.
•
Not all MicroSD cards are supported.
We cannot guarantee universal compatibility. The unit has been tested with many well-known
brands such as Kingston and Sandisk MicroSD cards up to 32GB. Many higher capacity cards
cannot be read by the unit, as well as some cards from other manufacturers.
•
The Receiver does NOT support hot-swapping SD cards.
Unlike a computer which can hot-swap memory cards, the receiver cannot load a new storage
device while it’s already processing video. This is a side effect of the way the storage is integrat-
ed into the processing device to minimize data errors.
If you want to change an SD card, then you’ll need to
turn off the receiver
before doing so.
Install the new storage media, and then re-apply power.
•
The Receiver has a built-in battery that can run it for up to two hours
If you want to move around your house, you can take the receiver with you. Simply unplug the
power socket and place the receiver nearby. The battery indicator on screen will tell you how
much charge is left. Plug the receiver back in to power to recharge the battery.
