Swann ADW-300 Installation Manual Download Page 2

Index

Introduction
Package Contents
Important Safety Instructions 
Camera & Receiver Layout 
Installation
Pairing Cameras
Troubleshooting, Hints & Tips
Technical Specifi cations 
Help Desk / Support Details
Warranty Information

2
2
3
4
4
5
6
7
Back Cover
Back Cover

Introduction

Thank you for purchasing the Extra ADW-300 Digital Wireless Camera by Swann.
The ADW-300 represents a leap forward in Wireless Security with improved reception 
and reliable transmission of digital signals.  Please read this user manual carefully before 
installing or using these units.

Important Safety Precautions: Please read before installing and using this product. 
Damages caused by non-compliance with this operating manual will void the warranty. 
We will not assume any liability for damages to items or persons caused by improper 
handling or non-compliance with the safety notices. Any warranty claim will be null 
and void in such cases.

Package Contents

•   1 x Wireless Camera
• 

1 x Camera Stand

• 

1 x AC/DC Adaptor for Camera

• 1 

Antenna

• 

Quick Start Guide & Accessories

If any of these items are missing, please contact your Swann for assistance.

NOTE:

All jurisdictions have specifi c laws and regulations relating to the use of cameras. Before 
using any camera for any purpose, it is the buyer’s responsibility to be aware of all appli-
cable laws and regulations that prohibit or limit the use of cameras and to comply with the 
applicable laws and regulations.
The legality of watching people other than yourself changes from country to country and 
even state to state. Contact your local government’s privacy information body or your local 
Police for more information on what if any restrictions you may face.

2

7

Troubleshooting (cont) 

This section offers some helpful information to overcome most of the problems you may encounter. 

About 2.4GHz Digital Wireless Signal:

 This innovative digital wireless solution integrates advance Frequency Hopping 

Spread Spectrum (FHSS) technology. This technology greatly reduces the interference that comes from other devices 
using the same radio frequency (2.4GHz), e.g. WIFI, Bluetooth, Zigbee, cordless phone etc. You now can enjoy a more 
pleasant wireless surveillance quality without fl icking and noisy image. However , weaker signal (lag or still image) can 
be observed yet from time to time, depending on the environment where the system is installed. Complied with FCC 
part 15.247, ETSI (EN) 300 328, audio / video signals transmitted out about or over 500 ft / 150 m in line of sight should 
be supported. Line of sight installation, though, is usually not a common practice. Factors affecting transmission include 
microwave ovens or other high frequency electromagnetic waves. Reinforced concrete walls, large scale metal products 
and metal furniture should not be located near the camera or the receiver. Obstacles as a person passing through may 
cause an unstable signal.

How do I improve the wireless signal quality?

 If possible, remove obstacles in between camera and receiver that 

might defl ect the signal. These could include furniture, cabinets, and walls. If you feel the wireless signal is not good 
enough, place the receiver at a new angle or readjust its position to make an improvement. Or simply relocate the cam-
era closer to the receiver.

How to improve the image quality?

 On QVGA size (X2, zoom IN), pixel scattering is unavoidable. However, you can 

try to zoom out the image to VGA size. By doing so, more pixels can be scattered on the monitor or have the best display 
performance, 32 inch or smaller monitor / TV is suggested.

Technical Specifi cations

Image

 

 

 

Image Sensor 

 

 

1/4” CMOS Sensor

Video 

Quality 

  380 

TV 

Lines

No. of Effective Pixels 

 

640 x 480 (VGA) / 320 x 240 (QVGA)

Minimum Illumination 

 

2 Lux Color, 0  Lux B&W

Day/Night 

Mode 

  Automatic

Lens 

   F3.6mm

Viewing 

Angle 

  H:53°,V:40°

Night Vision

Number of Infra-Red LEDs 

 

24

Infra-Red Wavelength 

 

850nm

Night Vision Distance 

 

25’ (8m)

General

Power 

Supply 

  DC 

5V

Operating Temperature 

 

14°F to 122°F, 10°C +50°C

Dimensions - Camera 

 

6.3” x 2.5” x 6.3”, 160x63x161mm 

Weight 

   0.7lbs, 

320g

PC 

Out 

   USB 

Compatible

TV Out 

 

 

 

3.5mm jack to RCA

Wireless

Reception 

Range 

  165’, 

50m

Frequency 

   2.4GHz

Transmission Channels 

 

Frequency Hopping GFSK

Summary of Contents for ADW-300

Page 1: ...ent will be warranted for either ninety days or the remainder of the original one year warranty period whichever is longer The end user is responsible for all freight charges incurred to send the product to Swann s repair centres The end user is responsible for all shipping costs incurred when shipping from and to any country other than the country of origin The warranty does not cover any inciden...

Page 2: ...tly reduces the interference that comes from other devices using the same radio frequency 2 4GHz e g WIFI Bluetooth Zigbee cordless phone etc You now can enjoy a more pleasant wireless surveillance quality without flicking and noisy image However weaker signal lag or still image can be observed yet from time to time depending on the environment where the system is installed Complied with FCC part ...

Page 3: ...or a Class B digital device pursuant to Part 15 of the FCC rules and ETSI EN 300 328 These limits are designed to provide reasonable protection against harmful interference in residential installations This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However ...

Page 4: ...hown A Simply pair the camera by selecting the desired channel in the OSD menu of the existing receiver not included B Only assign one camera to one channel Channel memory will be overwritten if the next camera is assigned to the same channel C Pairing new camera to channel 3 settings as shown D Press Pair E System will count down within 60 seconds system message as shown F Within 10 seconds press...

Reviews: