12
OPERATION
SAC16870N_IM.indd 12
27/03/2020 11:11
4 - 5. TEMPERATURE ADJUSTMENT:
The UP/DOWN keys are used to adjust the target temperature. This setting is
configurable only in cooling mode. By pressing the “UP” or “DOWN” button, the
target temperature is displayed on the screen.
6. VENTILATION SPEED:
The speed can only be adjusted in COOLING and FAN mode. The button on the
control panel or on the remote control can be used to select the desired speed by
successive presses): There are two speed: LOW and HIGH
7. TIMER:
To set the timer, press the button on the control panel of the unit or on the remote
control. Pressing the “+” or “-” buttons increases or decreases the time by one
hour. (1 hour at a time).
a) PROGRAMMING THE AUTOMATIC SWITCH OFF :
•
When the device is turned on, press the button . The timer indicator lights up.
•
Select the number of hours you want the unit to operate in COOLING mode. The
unit will stop automatically once the set time has elapsed.
b) PROGRAMMING THE AUTOMATIC SWITCH ON :
•
When the unit is in standby, press the button to program an automatic start of
the unit in COOLING mode.
•
If the timer is programmed (even when the unit is off), the display shows the
number of hours remaining before the unit turns on automatically.
8
. WATER TANK FULL “FULL”
:
The alarm light indicates that the water tank inside the unit must be drained. The
appliance will not operate until the water has been drained (see Cleaning and care
section).
