4
Mounting your Camera
The camera can be mounted onto a flat, vertical or
horizontal surface using the supplied mounting
screws. The surface must have sufficient strength
to hold the camera. Materials such as hardwood,
brick or masonry are good options. You can mount
the camera onto a metal surface, but you’ll need to
supply your own mounting hardware.
To mount the camera:
•
Position the camera in the location you want
to mount it, and mark the screw holes on
the surface to position the screws. Using the
appropriate screws for the surface you are
mounting to, screw the camera into place.
•
If you’re mounting to a wooden surface, screw
the camera directly to the surface.
•
When mounting to a masonry surface, you’ll
need to use the included wall plugs.
Aiming the camera:
•
Loosen the three screws located at the base of
the camera.
•
The dome cover can be rotated left or right.
•
The camera can be aimed in almost any
direction from wherever you choose to mount
it. After you’ve finished adjusting the viewing
angle, tighten each screw to lock the camera’s
position in place.
Positioning the cables:
•
When running the cable, try to avoid bending it
at sharp angles.
•
Avoid positioning the cable live electrical wiring.
AC electricity generates radio noise which can
interfere with the signal from your camera.
