3
GET TO KNOW YOUR RADIO!
Control Method
On/Off/Standby
Press the button to turn the radio on. Once on press it again to enter standby
mode or hold it to turn the radio off.
Using The Buttons
All the button actions are just a quick press unless otherwise stated in the required
action. This includes the button function of the dial.
Using The Dial
The dial on this radio is dual action. This means it will perform one action by turning
the dial and another action by pressing it.
First Time Use
After removing the radio from the packaging, connect the radio to the mains using
the adaptor supplied or insert 4 x ‘AA’ batteries into the battery compartment in
the base. Fully extend the aerial and press the button to turn the radio on.
The date and time will automatically be set from the DAB signal received. The radio
will then proceed to scan for the first time.
The number to the right of the display indicates the amount of channels found in
your region during this scan. After the scan is complete the radio will tune itself to
the first alphabetically listed station available in DAB mode.
DAB Mode
Selecting A Station
Use the tune +/- buttons to cycle through the available DAB stations on the display.
Press the dial to tune the radio into the station that is shown on the display.
Scan
You can retune or refresh the amount of DAB stations available by pressing the
‘Scan’ button. It is recommended you do this when the radio has been moved or if
you are getting a poor DAB signal.
SRA43010_IM.indd 3
03/08/2020 09:15
