![Swann 2K Series Instruction Manual Download Page 36](http://html.mh-extra.com/html/swann/2k-series/2k-series_instruction-manual_1412350036.webp)
36
Network: Network
DHCP (Dynamic Host Configuration Protocol):
Your router will automatical-
ly assign an IP address to each device connected to your network. This is
enabled by default.
If you are disabling DHCP, the following five options can be changed:
IP Address:
Each device on your network must have a unique IP address. A
typical address might be “192.168.1.24” or something similar.
Subnet Mask:
This allows the flow of network traffic between hosts to be
segregated based on a network configuration. A typical address might be
“255.255.255.0” or something similar.
Gateway:
This allows your DVR to connect to the internet. This is typically the
same IP address as your modem or router.
DNS (Domain Name System)1/2:
Input the DNS settings for your internet
service provider.
As SwannLink Peer-to-Peer technology is uti-
lised to communicate with your network and
mobile device, configuration of the network
settings is not required. If you have network-
ing expertise and require specific settings, you
do have the ability to change them.
→
Click “Default” to revert to default settings.
→
Click “Apply” to save settings.