Connect the video output on the video
& power cable to each camera input
(VIDEO INPUT) on your DVR. Twist the
connection to lock it in place.
Connect the supplied Ethernet cable
to the Ethernet port (LAN) on your
DVR then connect the other end to a
spare port on your router.
Connect the supplied mouse
to the bottom USB port.
To copy your video recordings and to
perform a firmware upgrade, connect
a storage device such as a USB flash
drive (not included) to the top port.
Your DVR is designed to ventilate air
to keep it at an optimal temperature.
Keep both sides of your DVR free from
obstructions to allow it to ventilate.
Connect the supplied HDMI cable
to the HDMI port on your DVR then
connect the other end to a spare HDMI
input on your TV.
Press the A/V button on your TV’s
remote to select the HDMI input your
DVR is connected to.
Connect the supplied power adapter’s
power connection to the power input
(12V IN) on your DVR first (this will
minimise sparking). Connect the
power adapter to a spare power outlet.
The bullet camera has three points of
articulation. Use the provided tool to
loosen each screw then adjust to the
desired position. Tighten each screw
again to secure in place.
Mounting and aiming the dome camera
1.
Loosen the three screws located at
the base of the camera then remove the
bracket cover and dome cover.
2.
Run the cable as required and using the
appropriate screws for the surface you are
mounting to, screw the bracket to fasten.
3.
Replace the dome cover and bracket
cover. The camera can be aimed in
almost any direction. After you’ve finished
adjusting the camera’s viewing position,
tighten each screw to lock the position in
place.
Power Input
Video Output
Twist to lock
connectors
Video Input
Video & Power Cable
Connect this to your DVR
Power Splitter
connects here
Power Output
Power Adapter
connects here
Power Splitter
Power Adapter
Video & Power Cable
connects here
Connect to a spare
power outlet
Bullet Camera
3
1
2
USB
Internet
4
3
2
HDMI IN 1
HDMI IN 2
Power Adapter
1
2
4
3
5
HDMI Cable
Ethernet Cable
Dome Camera
1
3
5
7
2
4
6
8
VIDEO
INPUT
VIDEO
INPUT
VGA
VGA
AUDIO
INPUT
AUDIO
INPUT
AUDIO
OUTPUT
AUDIO
OUTPUT
12V
12V
LAN
LAN
1
4
2
3
5
Digital Video Recorder
Positioning the bullet camera
To avoid damage, don’t position
the camera without loosening the
screws and locking ring first.
This enables you to rotate the
camera left or right.
This enables you to position the
camera up or down.
Twist the locking screw counter-
clockwise to rotate the camera stand
left or right. Tighten the locking
screw clockwise to secure in place.
1
2
3
What are the additional connections for?
Audio Input:
For connecting a microphone (the
microphone must have its own power source).
Audio Output:
For connecting to a stereo or amplifier.
This is not required when using the HDMI port.
VGA Port:
Connect this to your monitor with a VGA
input (VGA cable not supplied). This is not required
when using the HDMI port.
