2
⚫
To reduce the risk of electrical shock or fire, do not expose this unit to rain or
moisture.
⚫
Do not spill water or other liquids into or on to your unit.
⚫
Be sure that the local power outlet match that of the required voltage for your
unit.
⚫
Do not attempt to operate this unit if the power cord has been frayed or broken.
Do not attempt to remove or break off the ground prong from the electrical
cord. This prong is used to reduce the risk of electrical shock and fire in case of
an internal short.
⚫
Disconnect from main power before making any type of connection.
⚫
Do not remove the cover under any conditions. There are no user serviceable
parts inside.
⚫
Never operate this unit when it’s cover is removed.
⚫
Never plug this unit in to a dimmer pack.
⚫
Always be sure to mount this unit in an area that will allow proper ventilation.
Allow about 6” (15cm) between this device and a wall
.
⚫
Do not attempt to operate this unit, if it becomes damaged.
⚫
This unit is intended for indoor use only, use of this product outdoors voids all
warranties.
⚫
During long periods of non-
use, disconnect the unit’s main power.
⚫
Always mount this unit in safe and stable matter.
⚫
Power-supply cords should be routed so that they are not likely to be walked on
or pinched by items placed upon or against them, paying particular attention to
the point they exit from the unit.
⚫
Cleaning -The fixture should be cleaned only as recommended by the
manufacturer. See “Cleaning” for details.
⚫
Heat -The appliance should be situated away from heat sources such as
radiators, heat registers, stoves, or other appliances (including amplifiers) that
produce heat.
⚫
The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
C. The appliance has been exposed to rain or water.
D. The appliance does not appear to operate normally or exhibits a marked
change in performance.
Button
MENU To go forward in the selected functions or go back the last layer menu
UP
To go forward in the selected functions or increase parameters
DOWN To go backward in the selected functions or reduce parameters
ENTER Enter submenu
Notes
