SWALEC iplan, User Manual

Page: 8 / 59

Keep
surfaces
clear
Remove tab
SETTING UP YOUR SENSOR
Activating your sensor
Open the sensor and remove the little tab from the
battery pack. Check that the inside metal surfaces of
the sensor are visible. If there’s any covering layer
remaining, peel it off.
Only fit your sensor according to instructions. Do not
fit if the sensor is damaged.
If you see any corroded cable insulation, exposed
copper wires or notice a burning odour at your meter,
do not proceed with attaching your sensor. Please
call a qualified electrician.
Touching exposed wires or components may result in
electric shock causing possible injury or death.
Please refer to our ‘How to assess your meter safety’
page 54 for further guidance.
9
Warning