SWAGTRON T8, User Manual

Page: 18 / 56

English 18 SWAGTRON ® T8 Hoverboard
For the safety of yourself and others and to extend the battery’s life, please be sure to observe the following
instructions.
STEP 1. Turn off the T8 and plug the charger into a grounded wall outlet (100-240V; 50-60Hz), then plug the other
end of the charging adapter into the SWAGTRON ®
T8
.
STEP 2. Verify that the charger’s light is on. During charging, the light will be red. Once the T8 is fully charged, the
light will turn green.
STEP 3. Allow only up to 5.5 hours charging time then disconnect the T8 from the charger.
NOTE:
+
Use only the charging adapter provided with your T8. If you have lost or misplaced your charging adapter,
contact customer support to obtain a replacement.
+
Stop charging the T8 after it is fully recharged. DO NOT charge longer than 5.5 hours.
+
Please keep your charging environment clean and dry.
+
If the charging port is damp or has any liquid on it, do not charge your T8.
+
Avoid charging your T8 in excessively hot or cold environments.
+
Do not charge the battery if the battery or unit itself if there is any unusual odor, excessive heat, leakage, or
any physical damage.
+
Disassembly and battery maintenance should only be performed by an authorized professional.
Disassembly and battery maintenance should only be performed by an authorized professional.