Swagtron K8 User Manual 9
Adding the Handles
Open upper clamp of stem, and insert handles
into the stem and make sure the metal pegs pop
out to secure the handles properly, then close
the clamp to secure handles bar.
Notes
:
•
Adjust the screw under the upper clamp to
tighten the clamp in place if need.
•
When the handles are detached, they can be
stored in the handle fixture.
Adjusting the Stem
Open the lower clamp, press the metal peg in,
and raise or lower the stem to the desired height
level. The peg should pop into place. Close the
lower clamp to secure the stem.
Note
: In order for the scooter to be safe to
ride (1) the metal peg must pop into one of the
designated holes and (2) the lower clamp must
be closed.
Lower Clamp
Upper Clamp
Rear View
Handle Fixture
