MS-CRD-0147
Revision 0 05-10
© 2010 Swagelok Company
Swagelok—TM Swagelok Company
Printed in U.S.A.
May 2010, R0
If the tube curves up, loosen the adjusting knob.
4.
If the tube continues to curve down, tighten the
adjusting knob.
After the initial pass, additional straightening may
5.
be necessary. If so, work the straightener along the
length of tubing rotating the straightener to the 3, 6,
and 9 o’clock positions until desired straightening is
achieved.
Initial pass at 12 o’clock
Pass 1
12 o’clock
Pass 3
6 o’clock
Pass 2
3 o’clock
Pass 4
9 o’clock
Final pass at 9 o'clock