22
To achieve the desired bend, mark the tubing as
follows:
P1
= 3 in .
To determine the location of the bend mark for a
subsequent bend, add the
new
section leg length to
the
previous
bend mark location, then subtract the
adjustment (gain) of the
previous
bend .
P2
= P1 + 2 .5 in . – 5/16 in . adjustment = 5 3/16 in .
P3
= P2 + 3 in . – 5/16 in . adjustment = 7 7/8 in .
7 7/8 inches is the total length of tube needed .
90° adjustment
= 5/16 in .
Bend the tube as described in
Using the Bender,
page 12 .
Example
1/4 in . tubing using a 1/4 in . bender with a 9/16 in .
bend radius .
Crawford Hand Tube Bender MS-13-43 C-ELD-334
Reference
mark
3 in .
(76 .2 mm)
3 in .
(76 .2 mm)
9/16 in . R
2 .5 in .
(63 .5 mm)
P1
P2
P3
C
C
Summary of Contents for MS-HTB-10M
Page 1: ...Hand Tube Bender Manual www swagelok com...
Page 2: ...2...
