SVT SVT-MF4 Outdoor Station E, User Manual

Page: 17 / 20

-1 5 -
Set the unlocking time
In the setting mode:
Press * 1 (Yellow light blinks), and then enter 2-digit number
from 01 to 99 (Bi- is heard, and yellow light stops blinking). This
2-digit number is the unlocking time. For example, enter 05
means the unlocking time is 5 seconds.
Press # to exit the setting mode.
Add fingerprint
Delete the fingerprint
In the setting mode:
Delete one fingerprint: press 000-899, then press * twice to delete
the fingerprint in 000-899. If light turns green means the deletion
is successful.
Delete all fingerprint: press * 8 (Yellow light blinks), and then enter
8 twice (A continuous Bi - will be heard). The deletion is successful.
Press # to exit the setting mode.
In the setting mode:
Press 000-899 (Yellow light blinks. If red light is on, it indicates the
position is occupied. Press * twice to delete the information in this
position and then add the fingerprint. If green light is on, it indicates
the position is vacant. Fingerprint can be added. ) + put the finger
on the scanner until a Bi sound is heard. Then another Bi and Bi-
will be heard. It indicates the addition is successful. If BiBiBi are
heard, it indicates the addition fails. If BiBiBiBi are heard, it indicates
the fingerprint exists.
Press # to exit the setting mode.
Not
e
: Maximum 900 fingerprints
can be registered
.
Restore factory default
In the setting mode:
Press * 8 (Yellow light blinks), and then enter 9 twice (A continuous
Bi - will be heard). The factory default is restored.
Press # to exit the setting mode.