SVT innovations SVT-SMART 500, User Manual

Page: 17 / 24

-15-
Main Menu Introduction Main Menu Introduction
In monitor status, press >> main menu to enter main menu
interface. There are RECORDING SETUP, CAMERA SETUP,
NETWORK SETUP, SYSTEM SETUP and SYSTEM MANAGEMENT.
2.Network setting s
2.1 Network parameter (picture 2-2)
1.Camera S ettings
1.1 Video Setup (picture2-1)
Video Mode -
Provide two standards: PAL & NTSC. After
changi ng the video standard, it must restart the system. Then
the modification will be taken effect.
Picture 2-1
Ethernet Setup
PPPoE & 3G
DDNS Setup
Email
P2P Client
Picture 2-2
Obtain IP address automatically - After ticking this function, the
equipment will be assigned IP address, subnet mask, default
gateway, DNS server, etc., by the Router automatically
(This function requires the Router activates DHCP).
Activate UPnp - Optional choice.
IP address - Equipment network logical address.
Subnet mask - Set according to the actual communication status.
Default gateway - Allocate according to the actual connection.
(eg. NSR connects to the Router and write the Router address)
DNS server - DNS server address .
(eg.The DNS server address provided by ISP.)
Signaling port - Port for data, default port is 7777.
HTTP port - Default port is 80. If change is required, when using IE
browser to monitor, add the new port number in the end of the IP
address. For example, port number changes to 82. The IP address
typed in the IE brower is changed from http://192.168.0.19 to
http://192.168.0.19: 82
Cell phone port - network port for cell phone, default port is 5800