SVS SB-2000 PRO, Owner'S Manual

Page: 5 / 19

AC Power Connection
Connect the subwoofer power cord to the subwoofer ampli fi er and directly into an AC outlet.
Convenience outlets located on the rear panel of some AV receivers or pre/pros are NOT recom-
mended for your SB-2000 Pro as these outlets are not meant for high power devices.
Line Level Connection – Single LFE Channel
The most common way to connect your SB-2000 Pro is with a single RCA interconnect cable going
from the LFE or SUB1 Output on your AV receiver or preampli fi er to the LFE Input on your
SB-2000 Pro. This allows your processor to perform the upstream bass management and send
the subwoofer a pre- fi ltered mono signal.
SB-2000 Pro
SUBWOOFER
CONNECTING & CONTROLLING YOUR SUBWOOFER
Line Level Connection – Stereo Receiver or Preampli fi er Left/Right Channels
Both Left and Right inputs on your SB-2000 Pro can be used in a two-channel stereo application
with a stereo preampli fi er that has Left and Right line level outputs.
Connect the left and right outputs of your preampli fi er to the left and right line level inputs of the
SB-2000 Pro using RCA interconnects.
ON
OFF
R
3V-12V | AC/DC
L
+
VOL
LOW PASS
LOW PASS
PHASE
PHASE 0° 90° 180°
30Hz 40Hz 60Hz 90Hz 140Hz LFE
_
LINE LEVEL
INPUT
OUTPUT
TRIGGER INPUT
SVS SOUNDPATH WIRELESS
AUDIO ADAPTER
S T A - 5 5 0 D
LFE
5V 150mA
CENTER
REAR FRONT
SUBWOOFER
(SUB1)
LINE LEVEL OUTPUTS
INP
U
T
OU
TP
U
T
LFE
RECEIVER/PREAMP