SVS-Vistek SHR 10GigE, Manual

Page: 9 / 103

in the downolad section.
INFO All known 10GigE interface cards require Windows 10 as minimum version.
Latest Linux versions are supported as well.
2.5 4I/O adds light and functionality
Fig.: 2-1: Illustration of 4I/O concept of switching LEDs
Your SVS-Vistek camera is equipped with the innovative 4I/O-interface allowing
full light control, replacing external strobe controllers. Each of the outputs can be
individually configured and managed using pulse width modulation. With its high
current output, the camera is able to drive LED lights directly without external light
controller.
The integrated sequencer allows multiple exposures with settings to be pro-
grammed, creating new and cost effective options. Logical functions like AND /
OR are supported.
l
Up to 4 x open drain high power OUT
l
Up to 4 x high voltage IN – TTL up to 25 Volts
l
Power MOSFET transistors
l
PWM strobe control
l
Sequencer for various configurations
l
PLC fuctionality with AND, OR and timers
l
Safe Trigger (debouncer, prescaler, high low trigger)
INFO Find an example how to operate light control in the section on sequencer
(
"Sequencer" on page 79 ).
2 The SHR series 9