SVP UDR-104, Manual

Page: 144 / 232

UDR-108 Diversity Receiver
MANUAL V0
144
First, the status of the different LEDs available is presented. These LEDs
provide specific information about the status of the Receiver:
• ON/OFF:
The Led lights up GREEN when the equipment is turned on and it turns
up in red if the equipment is turned off.
•
ALARM:
The Led lights up RED when any alarm occurs.
•
REMOTE:
The Led lights up RED when the user is connected remotely to the
device.
•
STATUS:
The Led lights up GREEN when a change in the configuration of the
device is being processed.
Configuration:
•
Standby Mode:
In this option, Receiver can be configured to be in Standby or in ON
mode.
•
Timeout Reset:
In this field, the time that the Receiver could be without receiving any
signal is selected. After passing this time, the equipment is reset. To
disable this option, 0 value must be written. (editable parameter)
• Webserver IP:
In this field, the IP address for the Webserver connection can be
configured (editable parameter). This IP is the IP that has to be set in
the web browser to access the Webserver and it must be different from
the TSoIP Local IP and the Destin IP.
•
Webserver Subnet:
In this field, the Subnet address for the Webserver connection can be
configured. (editable parameter)
•
Webserver Gateway:
In this field, the Gateway address for the Webserver connection can be
configured. (editable parameter)
•
Webserver MAC:
In this field, the MAC address of the device is shown. (reading
parameter)
•
TSoIP Local IP:
In this field, the IP address of this device for the Video over IP
connection can be configured. This is the IP that you assign in your
local LAN for the device (editable parameter).