SVF FS7 Series Installation, Operation And Maintenace Manual Download Page 4

© SVF Flow Controls, Inc. • 13560 Larwin Circle • Santa Fe Springs, CA 90670 • Tel: 1.800.783.7836 • FAX: 562.802.3114

[email protected][email protected] • Visit our website: www.SVF.net • Specifications subject to change without notice

www

.

SVF

.net

Please visit www.SVF.net for the latest updates on this document. All data posted on our website supersedes all prior publications • [Document # SVF_FS7_IOM • 10/21/2013]

INSTALLATION, OPERATION & MAINTENANCE FOR SVF

 

SERIES FS7 BALL VALVES

FS7 Series Ball Valves

I   N   C   O   R   P   O   R   A   T   E   D

SV

 

F

 Flow Controls

 

IOM-FS7

TABLE A: TORQUE REQUIREMENTS (

in-lbs)

REPAIR KITS

Repair Kits are available from SVF Flow Controls, 

Inc. Table B below shows what the kits consist 

of. When ordering a Repair Kit, please be sure 

to specify the type, size and seating material 

of the valve.

When repairing a valve use only SVF Flow 

Controls, Inc. authorized spare parts including; 

bolts and nuts, etc. In addition to maintenance 

kits, spare parts are available from SVF Flow 

Controls, Inc. They are: balls, stems and glands. 

If additional parts are required (body and ends) 

it is normally recommended that the complete 

valve be replaced. 

Components from a different valve series should 

not be used with the repair of any other valve. 

If the valve is altered in any way, no liability can 

be accepted by SVF Flow Controls, Inc.

TABLE B: GENERAL REPAIR KIT

4

TORQUE SPECS

Certain precautions need to be followed when 

tightening bolts down to their corresponding 

torques to help prevent bolt galling. There 

are two passes each bolt has to undergo 

during the process, first pass and the final 

pass. Once every bolt has met the first pass 

requirement, the final pass can be initiated. 

When tightening down bolts it is necessary to 

follow the corresponding bolt pattern shown 

below.

FS7 SERIES BOLT PATTERN - BOLT TIGHTENING SEQUENCE

1

7

8

2

4

5

6

3

8

FS7 

Valve 

Size

Body Bolts

Bolt 

Pattern

First Pass

Final Pass

Stem 

Nuts

3”

8

177

354

620

4”

8

180

550

620

Part

Quantity

Thrust Washers

1

Stem Seals

4

Belleville Washers

2

Seats

2

Body Seals

2

Reviews: