3
other equipment along the beam. The trolley can also be used for beams with a curve provided that
the curve radius is at least 0,75 m.
Lift the trolley up to the I-beam
(1)
and adjust the trolley width so that the wheels will be placed on
the lower flange of the beam. By rotating the crank
(2)
the side plates with the wheels you can reduce
or increase the distance between the side plates. It is important that there is a certain space between
wheel flange and beam flange. Measure
A
must be 1 – 1,5 mm. Lock the correct width by rotating
the locking crank
(3)
to press against the side plate.
Hang the lifting device into the trolley with its suspension hook centred onto the suspension bolt
(4)
in the claw. Before taking the trolley in use check that it does not collide with other stuff (e.g. current
supply equipment).
Technical data
(see dimension sketch)
WLL *
ton
Model
Dimensions in mm
Weight
kg
M
A
B
min
C
D
E
F
G
L
0,5
25123
64 – 203
216
194
6
62 35 1,5 22 404
8
1
25143
64 – 203
264
208
8
70 43 1,5 26 404
11
* WLL = Working Load Limit
Dimension sketch
