![Sven SPS-910 Operation Manual Download Page 10](http://html1.mh-extra.com/html/sven/sps-910/sps-910_operation-manual_1410375010.webp)
1. SAFETY PRECAUTIONS
Do not allow AS wire connecting (including grounded ones), AS wire and amplifier package connecting, AS wire connecting to
ground, as this may cause amplifier output stages damage.
Never push objects of any kind (needles, hair&pins, coins, insects) into this system.
Do not put the system in damp circumstances, prevent from ingress of moisture and dust. (Do not place flower vases and other
objects on the system).
Prevent AS from heating. (Do not install AS near heat sources and prevent it from direct sunlight).
Do not use petrol, alcohol and other solvents when cleaning, as they may damage stained surface. Clean only with dry soft cloth.
Do not open AS.
If AS do not operate, unplug it and refer to service personnel.
2. PACKING INCLUDING
1. Wooden cabinet for sub&woofer – 1 pc
2. Plastic cabinet for woofer – 2 pcs
3. Link cable – 2 pcs
4. Signal input cable – 1 pcs
5. Remote control– 1 pc
6. Operation manual – 1 pc
3. AS FEATURES
Built&in OCL amplifier, circuit designed for sub&woofer and stereo channels output
Stereo channels intput, 3D&function
Remote control
Completely magnetically shielded, can be put together with PC monitor, TV without any interaction
Independent volume control knobs for sub&woofer and front speakers respectively
4. LOCATING
Place the speakers symmetrically to the listeners to the distance not less then one meter.
Place subwoofer in any convenient place even under desktop.
Place AS far away from TV sets as picture distortion in supersensitive monitors and TV sets is possible.
5. INSTALLATION AND OPERATION GUIDE
1. Connect the subwoofer and speakers with link cables (See fig. 1).
2. Insert one end of the signal input cable into the output port of audio (video) player (DVD, CD/VCD, TV, TAPE), then connect anoth&
er end with input port at the back of the subwoofer according to the red and the white cable respectively.
3. Plug into power connector for power and press POWER botton (See fig. 2).
4. Press button «3D» to select the 3D sound mode.
5. Adjust the VOLUME buttons for your satisfied speakers volume effect.
6. Adjust the BASS buttons for your satisfied subwoofer effect.
6. SPECIFICATION
10
OPERATION MANUAL
Output power (RMS):
subwoofer
woofer
15 W
2 х 5 W
Speaker unit:
subwoofer
woofer
3.5"
2 x 2.5" (full range)
Power supply
220 V AC, 50 Hz
Frequency response:
subwoofer
woofer
45–160 Hz
220–16 000 Hz
Dimension:
subwoofer
woofer
L 150 x D 250 x H 200 mm
L 80 x D 225 x H 80 mm
Weight
3.9 kg