Active
speaker
Passive
speaker
~220V
50Hz
e
d
c
a
b
Fig. 2. Remote control
h
f
g
i
Description of the construction
a
Built-in audio cable
b
Wired remote control
c
Ø 3.5 mm 2 mini-jack signal cable
d
Built-in power cord
e
POWER ON/OFF: power switch
f
VOL: volume control knob
g
Remote control illumination
h
: headphone jack
i
: microphone jack
Fig. 1. Rear panels
5. PREPARATION AND OPERATION
Speaker placement
•
Place the speakers symmetrically to the listener at least one meter away.
•
Place MSS far away from monitors and TV sets, as insigni
ԛ
cant image distortion in these
supersensitive devices is possible.
MSS Connecting
SPS-617 Multimedia Speaker System can be connected to virtually any audio source: DVD / CD, PC
sound card, etc. (see the
ǥ
onnection diagram, Fig. 3).
•
Before making any connections, make sure that the speaker system is switched o
Ԛ
.
•
Plug the Ø 3.5 mm mini-jack
c
(green) into the LINE IN port of your PC sound card, or connect it
to an MP3 or CD player. Then plug the 3.5 mm mini-jack (pink) into the microphone input on your PC
or laptop (see the
ǥ
onnection diagram, Fig. 3).
•
Plug the power cord
d
into the mains outlet.
•
Shift the POWER switch
e
into the ON position and adjust the volume level by turning the VOL
control knob
f
clockwise. By turning the knob clockwise, you increase the volume, by turning the
knob counterclockwise, you reduce it.
ENG
3
Operation Manual
SPS-617
