2.0 USB Multimedia
Speaker System
ENG
2
Congratulations on your purchase of the SVEN speaker system!
COPYRIGHT
© 2019. SVEN PTE. LTD. Version 1.0 (V 1.0).
This Manual and information contained in it are copyrighted. All rights reserved.
BUYER RECOMMENDATIONS
•
Unpack the device carefully. Make sure there are no accessories left in the box. Check up the device
for damage; if the product was damaged during transportation, address the firm which carried out
the delivery; if the product functions incorrectly, address the dealer at once.
•
Shipping and transportation equipment is permitted only in the original container.
•
Does not require special conditions for realization.
•
Dispose of in accordance with regulations for the disposal of household and computer equipment.
PACKAGE CONTENTS
•
Speaker system – 1 pc
•
Operation Manual – 1 pc
•
Warranty card – 1 pc
SAFETY PRECAUTIONS
•
Do not open the MSS and do not perform repairs by yourself. Service and repairs should be
performed only by qualified specialists at authorized service centers. The list of authorized service
centers is on www.sven.fi.
•
Do not allow the circuit of wires (including the grounded ones) between the speakers, on the power
amplifier or the ground, for it causes damage to the power amplifier output stage.
•
Make sure that foreign objects do not get inside the holes of the MSS.
•
Protect the MSS from high humidity, water and dust.
•
Protect the MSS from heating: do not place it closer than 1 m from a heat source. Do not expose
it to direct sunlight.
•
Do not place any open flame sources on or close to MSS.
•
Do not use any chemical agents for cleaning. Clean it with dry soft cloth only.
•
If the MSS does not operate, unplug it and address your dealer.
TECHNICAL DESCRIPTION
SPS-357 2.0 USB Multimedia Speaker System (MSS) is designed to play music and sound games,
movies, etc. The MSS has a built-in audio and signal cables enabling to connect it to a PC, laptop,
CD/MP3 player and other audio devices. The MSS is powered via a PC or laptop USB port, or via a
5V DC power supply with the built-in USB power cable. The speaker with an audio input and a control
panel is named the active one.
Technical support is on www.sven.fi.
