ENG
Operation Manual
PS-485
3
Speaker system description
a
MODE: switching modes button: Bluetooth/Radio / Player/LINE IN (short press);
ON/OFF the service signals (long pressing in Bluetooth mode)
b
LIGHT: switching backlight modes button
c
DEL: FM station deletion (long press in Radio mode)
d
EQ: EQ mode switch button
e
CH/ : button for switching between stations or frequency (in Radio mode);
repeat mode selection button (in the Player mode): ONE – repeats the current track; RAND – play
tracks in the random order; ALL – plays all tracks in the sequential order
f
FM-/ : next track (short pressing in Player and Bluetooth mode); Navigation on the track (long
pressing in Player mode); Next track/station (in Radio mode)
g
AUTO SCAN/ : Play/Pause button (in Player and Bluetooth mode); Start/Stop auto scan (long
pressing in Radio mode); Mute (short pressing in Radio mode)
h
FM+/ : next track (short pressing in Player and Bluetooth mode); Navigation on the track (long
pressing in Player mode); Next track/station (in Radio mode)
i
DC 5V IN: micro USB jack for charger connecting, the USB port of laptop / PC
j
Indicator
k
ON/OFF: POWER button
l
Display
m
TF CARD: micro SD card slot
n
USB: USB-flash card slot
o
AUX IN: 3.5 mm mini-jack for audio signal connecting (phone, MP3 player, etc.)
p
MIC: 6.3 mm jack microphone jack
q
MIC VOL +/-: microphone volume control knob
r
ECHO +/-: microphone echo adjustment knob
s
VOLUME: volume control knob
Fig.1.
CONNECTION AND OPERATION
Attention! The built-in battery must be charged completely prior to the application.
Speaker system battery charging
•
Connect speaker system to a USB port of PC or USB charger using micro USB to USB cable
(included). During battery charging the indicator
j
is red. Indicator
j
goes out when the battery
is charged.
•
The battery is used in the speaker system as an integral part of the device, therefore do not try to
extract or replace it, because this can result in the warranty cancellation or the device damage.
