ENG
4
Portable Speaker System
with Bluetooth and FM-radio
CONNECTION AND OPERATION
Attention! The built-in battery must be
charged completely prior to the
application.
Speaker system battery charging
•
Connect speaker system
to a USB
port of PC or USB charger using
micro
USB to USB
cable (included).
During battery charging the indicator
l
is red. Indicator
l
goes out when
the battery is charged.
•
The battery is used in the speaker system as an integral part of the device, therefore do
not try to extract or replace it, because this can result in the warranty cancellation or the
device damage.
Fig. 3. Rear panel
klmn op
DC 5V
ON OFF
USB
AUX
TF
CARD
OPERATION MODES
Bluetooth mode
•
Wireless data transfer via the Bluetooth protocol enables to connect speaker system
to
compatible devises. Maximum radius of action of data transfer is 10 m. Such obstacles as
walls or other electronic devices can interfere with the signal transfer.
•
Turn on the speaker system Bluetooth
mode
– press button МODE
a
нseveral times until
display shows «bt» inscription.
•
It is necessary to select the search mode of devices with Bluetooth on a sig
nal source
(telephone, notebook, smartphone, etc.). «
SVEN
PS-420», massage will be displayed on
the screen which is to be connected to*.
•
When connection is successful, there will be a short beep and the indication of the search
mode on speaker system is over**.
* You might have to enter “0000” code to connect some models of devices via Bluetooth.
** If the item has been already registered in the device list of a source, then the second search mode
activation is not obligatory. Choose the item name “SVEN PS-420” and the “
connect
”
command on
the source.
Radio mode
•
Turn on the speaker system –
press button МODE
a
several times until the display
shows the station frequency. Long-term pressing
button
g
activates auto search mode.
After scanning completion, the first scanned radio station will start to operate automatically.
With buttons
f
and
h
select a desired radio station.
