you want - we can
ENG
2.1 Multimedia Speaker System
16
5. PREPARATION AND OPERATION
Speaker placement
•
Place the satellites symmetrically to the listener at the distance not less than one meter.
•
Place MSS far away from monitors and TV sets, as insignificant image distortion in these super-
sensitive devices is possible. We recommend that the subwoofer should be placed on the table.
Installation and operation guide
MS-80 Multimedia Speaker System (MSS) can be connected to virtually any audio source: DVD/CD, PC
sound card, etc. (see Fig. 2).
WARNING! All components should be switched off before connection.
•
Connect the satellites to the subwoofer (Fig. 2).
•
Insert the mini-jack of the signal cable to the audio output of your PC soundcard, MP3, etc.
Note. To connect the MSS to a DVD/CD player or TV, use the built-in stereo signal cable with a
mini-jack to 2RCA adapter (not included), as shown in Fig. 2
.
•
Plug the power cord into a mains outlet.
•
Set the volume level to the minimum by turning the VOL
d
knob counterclockwise, turn on power
supply with the POWER
a
switch. The power LED
b
will light up.
•
Adjust the volume level by turning the VOL
d
knob.
•
Plug the headphones into the headphone jack
c
.
Notes:
• After using the MSS, mind to unplug the power cord from the mains outlet.
• To improve sound quality, use the Line-Out output of the sound card.
Fig. 2. Connection diagram
CD
DVD
Player
Power cord
PC
