Home Audio System
ENG
4
CONNECTION AND OPERATION
Attention! The built-in battery must be charged completely prior to the application.
Speaker system battery charging
•
Connect speaker system to a USB port of PC or USB charger using micro USB to USB cable
(included). During battery charging the indicator
j
is red. Indicator
j
goes out when the battery
is charged.
•
The battery is used in the speaker system as an integral part of the device, therefore do not try to
extract or replace it, because this can result in the warranty cancellation or the device damage.
OPERATION MODES
Bluetooth mode
•
Wireless data transfer via the Bluetooth protocol enables to connect speaker system to compatible
devises. Maximum radius of action of data transfer is 10 m. Such obstacles as walls or other electronic
devices can interfere with the signal transfer.
•
Turn on the speaker system Bluetooth mode – press button М
c
several times until display shows
«BLUE» inscription.
•
It is necessary to select the search mode of devices with Bluetooth on a signal source (telephone,
notebook, smartphone, etc.). «HA-930», massage will be displayed on the screen which is to be
connected to*.
•
When connection is successful, there will be a short beep and the indication of the search mode on
speaker system is over**.
* You might have to enter “0000” code to connect some models of devices via Bluetooth.
** If the item has been already registered in the device list of a source, then the second search mode
activation is not obligatory. Choose the item name «HA-930» and the “connect” command on the
source.
Radio mode
Attention! To improve the reception quality of the radio signal, connect the antenna (included)
to the
AUX/ANT
input
h
.
•
Turn on the speaker system – press button М
c
several times until the display shows the
station frequency. Long-term pressing button
e
activates auto search mode. After scanning
completion, the first scanned radio station will start to operate automatically. With buttons
d
and
f
(long pressing) select a desired radio station.
Player mode
Attention! The file system of a USB-flash carrier is FAT32.
•
The system will enter the Player mode automatically when a carrier USB flash is connected to
corresponding ports. Use button
e
to switch between Play/Pause modes. You can control tracks by
using buttons
d
(previous track) (long pressing) and
f
(next track) (long pressing).
The use in the wired mode (AUX)
•
Speaker system can be used as an external device for amplifying any audio source with a 3.5 mm
output mini-jack. Connect a cable plug 3.5 mini-jack to 3.5 mini-jack (included) to the audio input
AUX/ANT and connect 3.5 mm jack to the signal source.
